Gallbladder microbiota in healthy dogs and dogs with mucocele formation

To date studies have not investigated the culture-independent microbiome of bile from dogs, a species where aseptic collection of bile under ultrasound guidance is somewhat routine. Despite frequent collection of bile for culture-based diagnosis of bacterial cholecystitis, it is unknown whether bile from healthy dogs harbors uncultivable bacteria or a core microbiota. The answer to this question is critical to understanding the pathogenesis of biliary infection and as a baseline to exploration of other biliary diseases in dogs where uncultivable bacteria could play a pathogenic role. A pressing example of such a disease would be gallbladder mucocele formation in dogs. This prevalent and deadly condition is characterized by excessive secretion of abnormal mucus by the gallbladder epithelium that can eventually lead to rupture of the gallbladder or obstruction of bile flow. The cause of mucocele formation is unknown as is whether uncultivable, and therefore unrecognized, bacteria play any systematic role in pathogenesis. In this study we applied next-generation 16S rRNA gene sequencing to identify the culture-negative bacterial community of gallbladder bile from healthy dogs and gallbladder mucus from dogs with mucocele formation. Integral to our study was the use of 2 separate DNA isolations on each sample using different extraction methods and sequencing of negative control samples enabling recognition and curation of contaminating sequences. Microbiota findings were validated by simultaneous culture-based identification, cytological examination of bile, and fluorescence in-situ hybridization (FISH) performed on gallbladder mucosa. Using culture-dependent, cytological, FISH, and 16S rRNA sequencing approaches, results of our study do not support existence of a core microbiome in the bile of healthy dogs or gallbladder mucus from dogs with mucocele formation. Our findings further document how contaminating sequences can significantly contribute to the results of sequencing analysis when performed on samples with low bacterial biomass

Improving the rheometry of rubberized bitumen: experimental and computation fluid dynamics studies

Multi-phase materials are common in several fields of engineering and rheological measurements are intensively adopted for their development and quality control. Unfortunately, due to the complexity of these materials, accurate measurements can be challenging. This is the case of bitumen-rubber blends used in civil engineering as binders for several applications such as asphalt concrete for road pavements but recently also for roofing membranes. These materials can be considered as heterogeneous blends of fluid and particles with different densities. Due to this nature the two components tends to separate and this phenomenon can be enhanced with inappropriate design and mixing. This is the reason behind the need of efficient dispersion and distribution during their manufacturing and it also explains while realtime viscosity measurements could provide misleading results. To overcome this problem, in a previous research effort, a Dual Helical Impeller (DHI) for a Brookfield viscometer was specifically designed, calibrated and manufactured. The DHI showed to provide a more stable trend of measurements and these were identified as being ‘‘more realistic” when compared with those obtained with standard concentric cylinder testing geometries, over a wide range of viscosities. However, a fundamental understanding of the reasons behind this improvement is lacking and this paper aims at filling these gaps. Hence, in this study a tailored experimental programme resembling the bitumen-rubber system together with a bespoke Computational Fluid Dynamics (CFD) model are used to provide insights into DHI applicability to perform viscosity measurements with multiphase fluids as well as to validate its empirical calibration procedure. A qualitative comparison between the laboratory results and CFD simulations proved encouraging and this was enhanced with quantitative estimations of the mixing efficiency of both systems. The results proved that CFD model is capable of simulating these systems and the obtained simulations gave insights into the flow fields created by the DHI. It is now clear that DHI uses its inner screw to create a vertical dragging of particles within a fluid of lower density, while the outer screw transports the suspended particles down. This induced flow helps keeping the test sample less heterogeneous and this in turns allows recording more stable viscosity measurements

Microscopic Structure of High-Spin Vibrational Excitations in Superdeformed 190,192,194Hg

Microscopic RPA calculations based on the cranked shell model are performed to investigate the quadrupole and octupole correlations for excited superdeformed bands in 190Hg, 192Hg, and 194Hg. The K=2 octupole vibrations are predicted to be the lowest excitation modes at zero rotational frequency. At finite frequency, however, the interplay between rotation and vibrations produces different effects depending on neutron number: The lowest octupole phonon is rotationally aligned in 190Hg, is crossed by the aligned two-quasiparticle bands in 192Hg, and retains the K=2 octupole vibrational character up to the highest frequency in 194Hg. The gamma vibrations are predicted to be higher in energy and less collective than the octupole vibrations. From a comparison with the experimental dynamic moments of inertia, a new interpretation of the observed excited bands invoking the K=2 octupole vibrations is proposed, which suggests those octupole vibrations may be prevalent in SD Hg nuclei.Comment: 22 pages, REVTeX, 12 postscript figures are available on reques

Superdeformed rotational bands in the Mercury region; A Cranked Skyrme-Hartree-Fock-Bogoliubov study

A study of rotational properties of the ground superdeformed bands in \Hg{0}, \Hg{2}, \Hg{4}, and \Pb{4} is presented. We use the cranked Hartree-Fock-Bogoliubov method with the {\skm} parametrization of the Skyrme force in the particle-hole channel and a seniority interaction in the pairing channel. An approximate particle number projection is performed by means of the Lipkin-Nogami prescription. We analyze the proton and neutron quasiparticle routhians in connection with the present information on about thirty presently observed superdeformed bands in nuclei close neighbours of \Hg{2}.Comment: 26 LaTeX pages, 14 uuencoded postscript figures included, Preprint IPN-TH 93-6

Inelastic excitation of new high-spin yrast isomers in 180Ta

For the first time, six-quasiparticle isomers have been observed in the meta-stable nucleus 18073Ta107. Two new high-spin isomers were populated following deep-inelastic reactions with a pulsed 23892U beam incident on a thick 18072Hf target. Out-of-beam γ-ray events were collected using the Gammasphere germanium detector array. In addition to the known four-quasiparticle isomers, yrast Kπ = (22-) and K≥23 six-quasiparticle isomers have been observed with microsecond half-lives. These are the highest-spin isomers observed using the technique of deep-inelastic excitation. The assignments are compared to predictions made by BCS and Lipkin-Nogami multiquasiparticle calculations

Yrast three-quasiparticle K isomers in neutron-rich 181Hf

New high-K orbitals have been identified in the neutron-rich 181Hf nucleus via one-neutron transfer from a pulsed 238U beam onto a stable 180Hf target. Yrast three-quasiparticle high-K isomers, with half-lives as long as 1.5 ms, have been populated. The decay scheme of 181Hf has been extended to (25/2-). Blocked BCS calculations, including residual interactions, compare well with the experimental results

Fast-timing measurements in neutron-rich odd-mass zirconium isotopes using LaBr3:Ce detectors coupled with Gammasphere

A fast-timing experiment was performed at the Argonne National Laboratory to measure the lifetimes of the lowest lying states of nuclei belonging to the deformed regions around mass number A 110 and A 150. These regions were populated via spontaneous fission of 252 Cf and the gamma radiation following the decay of excited states in the fission fragments was measured using 51 Gammasphere detectors coupled with 25 LaBr 3 :Ce detectors. A brief description of the acquisition system and some preliminary results from the fast-timing analysis of the fission fragment 100Zr are presented. The lifetime value of \u3c4 = 840(65) ps was found for the 2 + state in 100 Zr consistent within one standard deviation of the adopted value with 791 +26 -35 ps. This is associated with a quadrupole deformation parameter of 0.36(2) which is within one standard deviation of the literature value of 0.3556 +82 -57

Fast-timing measurements in the ground-state band of Pd114

Using a hybrid Gammasphere array coupled to 25 LaBr3(Ce) detectors, the lifetimes of the first three levels of the yrast band in Pd-114, populated via Cf-252 decay, have been measured. The measured lifetimes are tau(2+) = 103(10) ps, tau(4+) = 22(13) ps, and tau(6+) <= 10 ps for the 2(1)(+), 4(1)(+), and 6(1)(+) levels, respectively. Palladium-114 was predicted to be the most deformed isotope of its isotopic chain, and spectroscopic studies have suggested it might also be a candidate nucleus for low-spin stable triaxiality. From the lifetimes measured in this work, reduced transition probabilities B(E2; J -> J - 2) are calculated and compared with interacting boson model, projected shell model, and collective model calculations from the literature. The experimental ratio R-B(E2) = B(E2; 4(1)(+) -> 2(1)(+))/B(E2; 2(1)(+) -> 0(1)(+)) = 0.80(42) is measured for the first time in Pd-114 and compared with the known values R-B(E2) in the palladium isotopic chain: the systematics suggest that, for N = 68, a transition from gamma-unstable to a more rigid gamma-deformed nuclear shape occurs

Quadrupole moment measurements for strongly deformed bands in Hf171,172

A lifetime experiment, using the Doppler-shift attenuation method, has been performed at Gammasphere to measure the transition quadrupole moments Q t of strongly deformed bands in Hf171 and Hf172. The measured value of Qt ~ 9.5 e b for the band labeled ED in Hf171 strongly supports the recent suggestion that this sequence and several structures with similar properties in neighboring Hf isotopes are associated with a near-prolate shape with a deformation enhanced relative to that of normal deformed structures. The measured values of Qt- 14 e b for the bands labeled SD1 and SD3 in Hf172 confirm that these sequences are associated with a prolate superdeformed shape, a property inferred in earlier work from other measured characteristics of the bands. Similar bands in Hf173-175 are also likely to be associated with superdeformed shapes. The observations are in contrast to predictions of cranking calculations performed with the ultimate cranker code

High-spin proton alignments and evidence for a second band with enhanced deformation in 171Hf

High-spin properties of the nucleus 171Hf were studied through the 128Te(48Ca,5n) reaction. Previously known bands have been extended to significantly higher spins and four new bands have been extracted from these data. The results are discussed within the framework of the cranked shell model aided by a comparison with level structures in the neighboring nuclei. The band crossings at rotational frequencies ∼500 keV are interpreted as caused by the alignments of h11/2 and h9/2 proton orbitals. Band ED2 exhibits an alignment pattern similar to that of band ED1 which was reported in a recent paper and proposed to be built on a second potential energy minimum involving the deformation-driving proton i13/2 - h9/2 configuration. It is likely that band ED2 is also associated with a deformation enhanced with respect to that of the normal deformed structures. Further experimental investigation is needed to ascertain the nature of this band